熱搜:win11繞過硬件限制安裝 一鍵重裝Win10系統 最干凈的u盤啟動盤 真正純凈版的win7系統
時間:2015-02-26 17:31:39 作者:qipeng 來源:系統之家 1. 掃描二維碼隨時看資訊 2. 請使用手機瀏覽器訪問: https://m.xitongzhijia.net/xtjc/20150226/39107.html 手機查看 評論 反饋
ln是Linux系統中一個重要的命令,能夠為文件建立鏈接,保持鏈接文件的同步性,下面小編就給大家介紹下Linux下如何使用ln命令,通過實例來詳細了解。
1. 使用ln命令給檔案創建symbolic link。
linux系統下的symbolic link類似于windows系統的快捷方式一樣。
使用ls命令查看,可以看到新創建的symbolic link有獨立的inode,也就是symbolic link會占用一個inode,但是其實際內容仍然是指向
源文件所指向的block區域。
# touch /tmp/file
# ls -lhi /tmp/file
3441 -rw-r--r-- 1 root root 0 Jan 1 00:09 /tmp/file
#
# ln -fs /tmp/file /tmp/symbolic_link
# ls -lhi /tmp/symbolic_link
3647 lrwxrwxrwx 1 root root 9 Jan 1 00:10 /tmp/symbolic_link -》 /tmp/file
#
2. 刪除symbolic link文件,實際上就是刪除這個inode,而不會影響到源文件所指向的block區域;
而如果刪除了源文件,那這個symbolic link文件就基本上沒用了。
# echo “link test” 》 /tmp/file
# cat /tmp/file
link test
#
# rm /tmp/symbolic_link
# cat /tmp/file
link test
#
# ln -fs /tmp/file /tmp/symbolic_link
#
# rm /tmp/file
# cat /tmp/symbolic_link
cat: can‘t open ’/tmp/symbolic_link‘: No such file or directory
#
# ls -lhi /tmp/symbolic_link
7357 lrwxrwxrwx 1 root root 9 Jan 1 00:22 /tmp/symbolic_link -》 /tmp/file
#
3. 使用ln命令創建hard link。
可以看到,創建hard link是使用同一個inode,而copy了一份源文件的block區域出來。
如果修改檔案的內容,源文件和hard link文件對應的block區域內容都會被修改,從而保持一致性。
# touch /tmp/file
# echo “hard link test” 》 /tmp/file
# cat /tmp/file
hard link test
# ln /tmp/file /tmp/hard_link
# ls -lhi /tmp/file
7996 -rw-r--r-- 2 root root 15 Jan 1 00:25 /tmp/file
# ls -lhi /tmp/hard_link
7996 -rw-r--r-- 2 root root 15 Jan 1 00:25 /tmp/hard_link
# cat /tmp/hard_link
hard link test
#
# echo “hard link test 2” 》 /tmp/file
# cat /tmp/file
hard link test 2
# cat /tmp/hard_link
hard link test 2
#
# echo “hard link test 3” 》 /tmp/hard_link
# cat /tmp/file
hard link test 3
# cat /tmp/hard_link
hard link test 3
#
4. 刪除hard link或者刪除源文件,實際上只是刪除其中其中一份block區域。
可以看到,雖然源文件被刪除(實際上只是刪除了源文件對應的block區),但是
inode仍然還在,所以仍然可以透過hard link檔案來訪問源文件的內容。
到了這里,就可以理解為什么inode信息中不包含文件名了;
因為如果文件名信息包含在inode中,并且創建了hard link,此時為何還需要兩塊不同的block區域
來儲存文件信息呢?進而hard link還有什么意義呢?
# rm /tmp/file
# cat /tmp/file
cat: can’t open ‘/tmp/file’: No such file or directory
#
# cat /tmp/hard_link
hard link test 3
#
# ls -hli /tmp/hard_link
7996 -rw-r--r-- 1 root root 17 Jan 1 00:29 /tmp/hard_link
#
5. 為目錄創建symbolic link?
因為新建的symbolic link目錄與源目錄是同一個inode,所以對這兩個目錄的訪問具有完全相同的表現。
# mkdir /tmp/directory
# ln -fs /tmp/directory/ /tmp/dir_sym_link
#
# ls -hdi /tmp/directory/
14018 /tmp/directory/
# ls -hdi /tmp/dir_sym_link/
14018 /tmp/dir_sym_link/
#
# touch /tmp/directory/file
# ls -hil /tmp/directory/file
14781 -rw-r--r-- 1 root root 0 Jan 1 00:47 /tmp/directory/file
# ls -hil /tmp/dir_sym_link/file
14781 -rw-r--r-- 1 root root 0 Jan 1 00:47 /tmp/dir_sym_link/file
#
# echo “directory symbolic test” 》 /tmp/dir_sym_link/file
# cat /tmp/dir_sym_link/file
directory symbolic test
# cat /tmp/directory/file
directory symbolic test
#
6. 為目錄創建hard link?
從結果看,為目錄創建hard link失敗了。
# ln /tmp/directory/ /tmp/dir_hard_link
ln: /tmp/dir_hard_link: Operation not permitted
上面就是Linux使用ln命令的方法介紹了,本文一共介紹了ln命令的六個實例,可以知道ln命令可以創建hard link,為目錄創建symbolic link等。
發表評論
共0條
評論就這些咯,讓大家也知道你的獨特見解
立即評論以上留言僅代表用戶個人觀點,不代表系統之家立場