熱搜:win11繞過硬件限制安裝 一鍵重裝Win10系統 最干凈的u盤啟動盤 真正純凈版的win7系統
時間:2015-04-03 17:05:07 作者:qipeng 來源:系統之家 1. 掃描二維碼隨時看資訊 2. 請使用手機瀏覽器訪問: https://m.xitongzhijia.net/xtjc/20150403/44096.html 手機查看 評論 反饋
可以看到如下的錯誤信息:
debug1: Next authentication method: gssapi-with-mic
debug1: An invalid name was supplied
Cannot determine realm for numeric host address
事實上,正是從gssapi-with-mic這一行開始,開始耗時間。
失敗的嘗試:
有人說是在目標機器中修改/etc/ssh/sshd_conf文件
將UseDNS 的缺省值由yes修改為no,并重啟sshd。我試了,對這種情況不管用。但不排除對別的延遲情況管用。
====================
有效的解決辦法:
1、修改本地機器的hosts文件,將目標機器的IP和域名加上去;蛘咦尡緳C的DNS 服務器能解析目標地址。
vi /etc/hosts
192.168.12.16 ourdev
其格式是“目標機器IP 目標機器名稱”這種方法促效。沒有延遲就連上了。不過如果給每臺都加一個域名解析,挺辛苦的。但在windows下用putty或secure-crt時可以采用這種方法。
2、修改本機的客戶端配置文件ssh_conf,注意,不是sshd_conf
vi /etc/ssh/ssh_conf
找到
GSSAPIAuthentication yes
改為
GSSAPIAuthentication no
保存。
再連目標機器,速度就飛快了。
GSSAPI ( Generic Security Services Application Programming Interface) 是一套類似Kerberos 5 的通用網絡安全系統接口。該接口是對各種不同的客戶端服務器安全機制的封裝,以消除安全接口的不同,降低編程難度。但該接口在目標機器無域名解析時會有問題。我看到有人給Ubuntu提交了相關bug, 說要將GSSAPIAuthentication的缺省值設為no,不知為何,ubuntu9.10的缺省值還是yes。
修改完畢,此時的連接調試數據變?yōu)榱耍?/p>
view plaincopy to clipboardprint?
ssh -v 192.168.12.16
OpenSSH_5.1p1 Debian-6ubuntu2, OpenSSL 0.9.8g 19 Oct 2007
debug1: Reading configuration data /etc/ssh/ssh_config
debug1: Applying options for *
debug1: Connecting to 192.168.12.16 [192.168.12.16] port 22.
debug1: Connection established.
debug1: identity file /home/zhouhh/.ssh/identity type -1
debug1: identity file /home/zhouhh/.ssh/id_rsa type -1
debug1: identity file /home/zhouhh/.ssh/id_dsa type -1
debug1: Remote protocol version 2.0, remote software version OpenSSH_4.3
debug1: match: OpenSSH_4.3 pat OpenSSH_4*
debug1: Enabling compatibility mode for protocol 2.0
debug1: Local version string SSH-2.0-OpenSSH_5.1p1 Debian-6ubuntu2
debug1: SSH2_MSG_KEXINIT sent
debug1: SSH2_MSG_KEXINIT received
debug1: kex: server-》client aes128-cbc hmac-md5 none
debug1: kex: client-》server aes128-cbc hmac-md5 none
debug1: SSH2_MSG_KEX_DH_GEX_REQUEST(1024《1024《8192) sent
debug1: expecting SSH2_MSG_KEX_DH_GEX_GROUP
debug1: SSH2_MSG_KEX_DH_GEX_INIT sent
debug1: expecting SSH2_MSG_KEX_DH_GEX_REPLY
debug1: Host ‘192.168.12.16’ is known and matches the RSA host key.
debug1: Found key in /home/zhouhh/.ssh/known_hosts:1
debug1: ssh_rsa_verify: signature correct
debug1: SSH2_MSG_NEWKEYS sent
debug1: expecting SSH2_MSG_NEWKEYS
debug1: SSH2_MSG_NEWKEYS received
debug1: SSH2_MSG_SERVICE_REQUEST sent
debug1: SSH2_MSG_SERVICE_ACCEPT received
debug1: Authentications that can continue: publickey,gssapi-with-mic,password
debug1: Next authentication method: publickey
debug1: Trying private key: /home/zhouhh/.ssh/identity
debug1: Trying private key: /home/zhouhh/.ssh/id_rsa
debug1: Trying private key: /home/zhouhh/.ssh/id_dsa
debug1: Next authentication method: password
password:
上面就是ssh連接Linux過慢的解決方法介紹了,通過本文的方法解決后,連接速度明顯快了不少,大大節約了時間。
發表評論
共0條
評論就這些咯,讓大家也知道你的獨特見解
立即評論以上留言僅代表用戶個人觀點,不代表系統之家立場