熱搜:win11繞過硬件限制安裝 一鍵重裝Win10系統 最干凈的u盤啟動盤 真正純凈版的win7系統
時間:2015-09-01 14:42:37 作者:zhijie 來源:系統之家 1. 掃描二維碼隨時看資訊 2. 請使用手機瀏覽器訪問: https://m.xitongzhijia.net/xtjc/20150901/56692.html 手機查看 評論 反饋
在Linux系統中想要讓Vim編輯器發揮更大的作用,就要對給給它安裝一些插件。比如說YouCompleteMe插件(名字就很形象)。本文就來介紹一下Linux系統Vim如何安裝YouCompleteMe插件。
編譯配置選項:
。/configure --with-features=huge --enable-pythoninterp --enable-python3interp --enable-luainterp --enable-multibyte --enable-sniff --enable-fontset
在我的機器上裝有python2.7.5 和 python3.3, 但加了enable-python3interp參數依然沒有支持py3,不知何故,先不管,YouCompleteMe 只要求有py2.6以上。
安裝vundle插件
git clone https://github.com/gmarik/vundle.git ~/.vim/bundle/vundle
在.vimrc中配置
set nocompatible “ be iMproved, required
filetype off ” required
“ set the runtime path to include Vundle and initialize
set rtp+=~/.vim/bundle/vundle/
call vundle#rc()
” alternatively, pass a path where Vundle should install plugins
“let path = ‘~/some/path/here’
”call vundle#rc(path)
“ let Vundle manage Vundle, required
Plugin ‘gmarik/vundle’
” The following are examples of different formats supported.
“ Keep Plugin commands between here and filetype plugin indent on.
” scripts on GitHub repos
Plugin ‘tpope/vim-fugitive’
Plugin ‘Lokaltog/vim-easymotion’
Plugin ‘tpope/vim-rails.git’
“ The sparkup vim script is in a subdirectory of this repo called vim.
” Pass the path to set the runtimepath properly.
Plugin ‘rstacruz/sparkup’, {‘rtp’: ‘vim/’}
“ scripts from https://vim-scripts.org/vim/scripts.html
Plugin ‘L9’
Plugin ‘FuzzyFinder’
” scripts not on GitHub
Plugin ‘git://git.wincent.com/command-t.git’
“ git repos on your local machine (i.e. when working on your own plugin)
Plugin ‘file:///home/gmarik/path/to/plugin’
” 。。。
filetype plugin indent on “ required
Bundle ‘Valloric/YouCompleteMe’
保存退出,打開vim,輸入 :BundleInstall 進行自動安裝
進程如下,+號表示已經安裝,》表示正在安裝。
。 Plugin ‘gmarik/vundle’ |~
+ Plugin ‘tpope/vim-fugitive’ |~
+ Plugin ‘Lokaltog/vim-easymotion’ |~
+ Plugin ‘tpope/vim-rails.git’ |~
+ Plugin ‘rstacruz/sparkup’ |~
+ Plugin ‘L9’ |~
+ Plugin ‘FuzzyFinder’ |~
》 Plugin ‘git://git.wincent.com/command-|~
t.git’ |~
Plugin ‘file:///home/gmarik/path/to/pl|~
ugin’ |~
Plugin ‘Valloric/YouCompleteMe’ |~
Helptags
結束時有個錯誤,這是正常的,因?yàn)閥cm需要手工編譯出庫文件
Done! With errors; press l to view log
ycm_client_support.[so|pyd|dll] and ycm_core.[so|pyd|dll] not detected; you need
to compile YCM before using it. Read the docs!
到 .vim/bundle/YouCompleteMe 下跑
。/install.sh --clang-completer
參數是為了支持c/c++ 的補全。
安裝完成后進行一些簡單的配置就可以使用。
YouCompleteMe 的補全配置文件在/bundle/YouCompleteMe/cpp/ycm/.ycm_extra_conf.py,這是個隱藏文件。
默認會使用這個文件,也可以把這個文件copy到工程的根目錄中作修改,打開工程文件時會優先使用當前目錄下的配置文件。
如果找不到,會根據配置中的ycm_global_ycm_extra_conf 進行查找。
在.vimrc 中添加
let mapleader = ”,“ ” 這個leader就映射為逗號“,”
let g:ycm_global_ycm_extra_conf = ‘~/.vim/bundle/YouCompleteMe/cpp/ycm/.ycm_extra_conf.py’ “配置默認的ycm_extra_conf.py
nnoremap 《leader》jd :YcmCompleter GoToDefinitionElseDeclaration《CR》 “按,jd 會跳轉到定義
let g:ycm_confirm_extra_conf=0 “打開vim時不再詢問是否加載ycm_extra_conf.py配置
let g:ycm_collect_identifiers_from_tag_files = 1 “使用ctags生成的tags文件
以上就是Linux給Vim安裝YouCompleteMe插件的方法了,YouCompleteMe插件號稱Vim自動補全神器,這個插件對Vim來說相當重要。
發表評論
共0條
評論就這些咯,讓大家也知道你的獨特見解
立即評論以上留言僅代表用戶個人觀點,不代表系統之家立場